TP-183P User Manual
Operation
4-2
Step 6
Fix paper on the front shaft by twin adhesive tape (Figure 4-6).
Step 7
Place the two dancer bars into the dancer guiders . (Figure 4-7)
(Detailed composition refer to Figure 2-1)
Step 8
Adjust the two dancer bars to the position between
sensors by loose or tighten the paper roll.
(Figure 4-8)
【
Figure 4-8
】
Sensor
Dancer bar
【
Figure 4-7
】
G
D
【
Figure 4-5
】
Draw out paper from upper
side of the roll.
【
Figure 4-4
】
【
Figure 4-6
】
