Jaguar II User Manual
Set
Communication
These setting are used to connect the
communication between host computer and
cutter. Baud Rate is to determine the speed of
data transmission. Data Bits refers to the size
of one block of data and Parity is used to check
if data was revived correctly or not.
9600, n, 7, 1, p
9600pbs, 7 Bits with NO Parity
9600, o, 7, 1, p
9600pbs, 7 Bits with ODD Parity
9600, e, 7, 1, p
9600pbs, 7 Bits with EVEN Parity
9600, n, 8, 1, p
9600pbs, 8 Bits with NO Parity
9600, o, 8, 1, p
9600pbs, 8 Bits with ODD Parity
9600, e, 8, 1, p
9600pbs, 8 Bits with EVEN Parity
19200, n, 7, 1, p 19200pbs, 7 Bits with NO Parity
19200, o, 7, 1, p 19200pbs, 7 Bits with ODD Parity
19200, e, 7, 1, p 19200pbs, 7 Bits with EVEN Parity
19200, n, 8, 1, p 19200pbs, 8 Bits with NO Parity
19200, o, 8, 1, p 19200pbs, 8 Bits with ODD Parity
19200, e, 8, 1, p 19200pbs, 8 Bits with EVEN Parity
Firmware Version Display version number of Firmware and FPGA
code.
Paper Saving Mode
Enable this function will save media. There are
four alternatives in this function.
1. Length expanded mode
2. Width expanded mode
3. Both expanded mode
4. Both unexpanded mode
Both
unexpanded
mode
[Misc]
Select Language Provides LCM message display in different
languages. Jaguar II supports English, Spanish,
Italian, Deutsch, Japanese, Portuguese, Polish,
Turkish and French for LCM display.
English
Select Units
Provides two unit systems for users convenient. Metric (cm/gram)
and English
(inch/oz)
Metric
Description of Operation 3-5
