Jaguar II User Manual
5.2 Cleaning the Grid Drum
1. Turn off the cutting plotter, and move the tool carriage away from the area needed to be
cleaned.
2. Raise the pinch rollers and move them away from the grid drum for cleaning.
3. Use a bristle brush (a toothbrush is acceptable) to remove dust from the drum surface.
Rotate the drum manually while cleaning. Refer to
Figure 5-1
Figure 5-1
5.3 Cleaning the Pinch Rollers
1. If the pinch rollers need a thorough cleaning, use a lint-free cloth or cotton swab to wipe
away the accumulated dust from the rubber portion of the pinch rollers. To prevent the pinch
rollers from rotating while cleaning, use finger to hold the pinch rollers not to rotate.
2. If needed to remove the embedded or persistent dust, use the lint-free cloth or cotton swab
moistened with rubbing alcohol.
Basic Maintenance 5-2
