FIG. 3
FIG. 4
FIG. 5
FIG. 6
PAGE 3 OF 3
STEP 2 –
ATTACH
4
SLIDING MOUNTING BLOCKS IN
DESIRED POSITIONS USING
4
QUICK CLIP
PINS PROVIDED.
SEE FIG. 3
STEP 3
–
USING A RUBBER MALLET OR
HAMMER, DRIVE THE
6
– 1”
MULTI PLUGS INTO OPEN ENDS
OF THE HORIZONTAL BARS OF
THE RIDE-N-REST FRAME.
SEE
FIG. 4
STEP 4 –
POSITION RIDE-N-REST FRAME
ONTO CENTER OF ATV REAR RACK
TO MAKE SURE THE
4
SLIDING
MOUNTING BLOCKS ARE IN THE
PROPER POSITION FOR RIDE-N-
REST TO BE SECURED TO ATV
RACK.
SEE FIG. 5
STEP 5 –
ATTACH RIDE-N-REST SLIDING
MOUNTING BLOCKS TO ATV RACK
USING
4
– RIV-NUT PLATES,
8
–
FLAT WASHERS AND
8
– 1/4” X 1
3/4” BOLTS
OR
8
– 1/4” X 2 3/4”
BOLTS (DEPENDING ON THICKNESS
OF ATV RACK). FINGER TIGHTEN
BOLTS UNTIL SNUG, BUT NOT
COMPLETELY TIGHT.
SEE FIG. 6
