FIG. 7
FIG. 8
FIG. 9
NEVER USE THE RIDE-N-REST FOR ANY PURPOSE OTHER THAN INTENDED.
For more information about this or other products, contact us at:
Great Day, Inc.
604 Kimbrough Dr. * Tallulah, LA 71282 * (866) 649-1918 *
STEP 6 –
RE-CHECK RIDE-N-REST TO BE SURE
IT IS CENTERED ON ATV RACK AND
TIGHTEN BOLTS SECURELY USING A
7/16” WRENCH.
SEE FIG. 7
STEP 7 –
TO SECURE RIDE-N-REST CUSHION,
REMOVE THE
2
FRONT QUICK CLIP
PINS FROM THE MOUNTING BLOCKS,
PIVOT CUSHION TO DESIRED ANGLE
AND PIN VERTICAL SUPPORT BARS
TO HORIZONTAL FRAME BARS THEN
REPLACE QUICK CLIP PINS.
SEE FIG.
8
STEP 8 –
TO LAY BACKREST IN
HORIZONTAL POSITION REMOVE
2
QUICK CLIP PINS FROM VERTICAL
SUPPORT BARS, LAY BACKREST
FLAT AND REPLACE QUICK CLIP
PINS INTO SLIDING MOUNTING
BLOCKS.
SEE FIG. 9
