2019-06-12
401-705M
YP3025A
Appendix B - Pre-Delivery
170
Weight Transfer Shipping Links
If optional weight transfer is not installed, continue at
When a planter is on customer premises, and further
movements will only be done with a tractor or towing
vehicle having hydraulic motor return and case drain
remote ports, remove the weight transfer shipping links.
1. Use a hoist or a second worker to support the weight
of the outboard end of a weight transfer cylinder .
2. Remove both cotter pins and clevis pins:
805-058C PIN COTTER 3/16 X 2
805-396C PIN CLVS 1.0X3.13 USBL
from each end of a shipping link:
411-175H WT SHIP LINK
Remove the link.
3. Swing the cylinder down. Align the clevis with the
wing lug . Secure with one of the clevis pins and
cotters.
4. Store the other clevis pin and cotter in the clevis end
of the link. Store the link for future use.
5. Repeat step 1 through step 4 for the other wing.
To install a link, complete step 4 through step 1 in
reverse order.
See page 48 for initial weight transfer setup.
Install Press Wheels
To meet highway clearance requirements, press wheel
arms and wheels on wing rows are not factory-installed.
1. Remove and save the
3
/
8
-13x1 inch hex head bolt
and washer at the back of an incomplete row unit
.
There are four bolts at this location. Remove only the hex head
bolts. Do not loosen or remove the square head bolts forward.
2. Remove and save the
3
/
8
-13x1
3
/
8
inch hex head bolt
, washer, and eccentric adjuster nut.
3. Align the
3
/
8
inch holes in the press wheel assembly
with the
3
/
8
-13 tapped holes in the row unit, loosely
assemble with the
3
/
8
-13x1 inch hex head bolt and
4. Loosely screw in the
3
/
8
-13x1
3
/
8
inch hex head bolt
, washer, and eccentric adjuster nut. Rotate the
adjuster to visually align the press wheel assembly
with the row unit, and tight the adjust and both bolts.
Figure 144
Weight Transfer Shipping Link
36422
858-295C
DO NOT MOVE PLANTER FOLDED
OR UNFOLDED WITHOUT CONNECTING
FAN CASE DRAIN AND LOW PRESSURE
RETURN TO THE TRACTOR OR
INSTALLING WEIGHT TRANSFER
SHIPPING LINKS. FAILURE TO DO
SO CAN RESULT IN DAMAGE TO
WEIGHT TRANSFER CIRCUIT.
NOTICE
1
2
3
2
3
1
2
2
3
1
Figure 145
25AP Press Wheel Assembly
25383
1
2
4
3
