2019-06-12
401-705M
YP3025A
Preparation and Setup
24
Lock Up Fertilizer Drive
YP3025A serial number
Loss of Control and Sharp Object/Crushing Hazards:
Do not lift or lower wheel by spoke or rim; use handle only.
Keep feet out from under wheel. 90 pounds (41 kg) force is
required to lift wheel. If you lose your grip before pinning, or
after unpinning, the arm snaps down rapidly. The traction
teeth and the force of the wheel impact can inflict serious
injury.
The liquid fertilizer option uses a piston pump driven by a
ground contact wheel. When not using the fertilizer drive,
preserve the pump by locking up the ground wheel. On
older models remove the chain.
Do not operate planter pump when not applying
material.
For YP3025A planters:
1. Remove clevis pin from storage hole .
2. Release the lock arm
, lift handle
to lift ground
wheel up to position it in-between lock arm.
3. Secure with pin clevis
and cotter pin.
AccuShot System (Option)
Some Yield-Pro Planter models have the option of
having AccuShot installed for fertilizing crops. AccuShot
applies a set amount of liquid fertilizer to a specific
location relative to each seed in a furrow. More precise
application gives seeds a better chance at germination
and improved growth.
If your machine has AccuShot, refer to the AccuShot
Operator / Maintenance Manual and AccuShot Quick
Start Guide for more information on how to use your
application system.
This kit is factory install only. Planters cannot be fitted with
AccuShot through your dealer.
Manual Name
Part Numbers
AccuShot Operator Manual
115700-001
Accushot Quick Start Guide
115700-002
Figure 15
Locked Up Fertilizer Drive
32364
5
7
6
4
Figure 16
AccuShot System Manuals
38425
