2019-06-12
401-705M
YP3025A
Important Safety Information
6
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
Read and follow decal directions.
Keep lights in operating condition.
Keep all safety decals clean and legible.
Replace all damaged or missing decals. Order new
decals from your Great Plains dealer. Refer to this
section for proper decal placement.
When ordering new parts or components, also request
corresponding safety decals.
Slow Moving Vehicle Reflector
818-055C
On the back of the walkboard platform;
1 total
Red Reflectors
838-266C
On rear face of axle (below Daytime reflectors);
two total
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
31417
31417
