2019-06-12
401-705M
YP3025A
Operating Instructions
28
Raising/Lowering Planter
Planter raising/lowering relies on the four lift cylinders at
the mainframe and wing end gauge wheels.
The Planter
must
be raised for folding and unfolding.
The Planter will not lower to the ground if transport locks
are installed. See “
When unfolded, if one or both markers are extended,
they may drag or shove if left extended during raise or
lower operations. To avoid this, fold
markers prior to raise or lower.
Machine Damage Risk:
Do not lower Planter while folded unless cylinder lock
channels are installed on cylinders. Without lock channels,
lowering when folded causes the front center transport wheels
to contact the inside wing row units. Damage
WILL
occur.
Machine Damage Risk:
Do not lower while any Planter folding operations are
underway or partially complete.
Machine Damage Risk:
Always raise the Planter for any reverse/backing operations.
1
Figure 23
Clutch Folding Module
26113
Figure 24
Planter Raised
29280
Figure 25
Planter Lowered
29281
