2019-06-12
401-705M
YP3025A
Adjustments
68
Row Unit Down Pressure
Row unit down force is created by:
+ cam-adjusted spring force,
+ the weight of the row unit,
- variable force removed by the optional Row-Pro™
pneumatic system.
The ideal amount of down-force causes the side gauge
wheels to compress any loose surface soil, but not press
a trench into subsoil.
To assess down-force, operate the planter for a short
distance on typical ground (with or without seeding), and
stop. Leave the planter lowered (row units in ground).
At several row units, inspect the furrow created by the
opener discs, but prior to furrow closing by the press
wheels.
Be sure to inspect rows both in and out of tractor tire
tracks.
1. If the side gauge wheels are leaving no tracks, or
light tracks, increase down-force.
2. If the wheels are compressing trash and loose soil,
and leaving clear tracks right at the top of the
subsoil, down-force is probably correct and needs no
adjustment.
3. If the wheels are creating a trench into the subsoil,
down-force is too high and needs to be reduced.
Adjusting Down-Force
The the planter has the optional Row-Pro™ system, set
the cam-adjusted system to the maximum force needed
for the present field conditions. The pneumatic cylinders
provide a maximum force reduction of about 60 pounds,
which is only one cam notch at higher settings.
Row unit springs
provide the primary down pressure
necessary for row unit disks to open a seed trench. The
weight of the row units themselves contributes about
130 pounds (59 kg) of the total force.
The springs allow the row units to float down into
depressions and up over obstructions. Springs also
provide down force on coulters when using optional row
mounted coulters, and provide the primary down force on
row cleaners (optional), seed firmers (optional) and
press wheels.
{
Inspect Furrow Here
Figure 69
Checking Furrow
29600
Light or no side gauge
wheel tracks
Insufficient down-force
Increase down-force
Gauge wheels compress
loose soil only
Ideal
No adjustment required
Side gauge wheels
making deep tracks
Down-force too high
Reduce down-force
Figure 70
Assessing Down-force
1
2
3
1
Figure 71
25 Series Row Unit Springs
29600
