GREAT PLANES EDGE 540 T Performance Series Instruction Manual Download

Page: 3 / 24

PROTECT YOUR MODEL, YOURSELF

& OTHERS....FOLLOW THESE

IMPORTANT SAFETY PRECAUTIONS

1. Your Edge 540T EP ARF should not be considered a toy,
but rather a sophisticated, working model that functions very
much like a full-size airplane. Because of its performance
capabilities, the Edge 540T EP ARF, if not assembled and
operated correctly, could possibly cause injury to yourself or
spectators and damage to property.

2. You must assemble the model according to the instructions.
Do not alter or modify the model, as doing so may result in an
unsafe or unfl yable model. In a few cases the instructions may
differ slightly from the photos. In those instances the written
instructions should be considered as correct.

3. You must take time to build straight, true and strong.

4. You must use an R/C radio system that is in fi rst-class
condition, and a correctly sized motor and components
(wheels, etc.) throughout the building process.

5. You must correctly install all R/C and other components
so that the model operates correctly on the ground and in
the air.

6. You must check the operation of the model before every
fl ight to insure that all equipment is operating and that the
model has remained structurally sound. Be sure to check
clevises or other connectors often and replace them if they
show any signs of wear or fatigue.

7. If you are not an experienced pilot or have not fl own
this type of model before, we recommend that you get the
assistance of an experienced pilot in your R/C club for
your fi rst fl ights. If you’re not a member of a club, your local
hobby shop has information about clubs in your area whose
membership includes experienced pilots.

8. WARNING: The cowl and wheel pants included in this kit
are made of fi berglass, the fi bers of which may cause eye,
skin and respiratory tract irritation. Never blow into a part
(wheel pant, cowl) to remove fi berglass dust, as the dust
will blow back into your eyes. Always wear safety goggles, a
particle mask and rubber gloves when grinding, drilling and
sanding fi berglass parts. Vacuum the parts and the work
area thoroughly after working with fi berglass parts.

We, as the kit manufacturer, provide you with a top quality,
thoroughly tested kit and instructions, but ultimately the
quality and fl yability of your fi nished model depends
on how you build it; therefore, we cannot in any way
guarantee the performance of your completed model,
and no representations are expressed or implied as to the
performance or safety of your completed model.

Remember: Take your time and follow the instructions to
end up with a well-built model that is straight and true.

DECISIONS YOU MUST MAKE

This is a partial list of items required to fi nish the Edge 540T
EP ARF that may require planning or decision making before
starting to build.

Radio Equipment

A 4-channel radio system with four micro servos and micro
receiver are required for this plane. The servos and receiver
shown in the manual are Futaba

S3115 Micro Precision

Servo and the Futaba R146iP PCM receiver. For more
precision, the Futaba S3150 Slim Digital Servos work great.

Transmitter

❏

4-channel radio (minimum)

❏

5-channel computer radio with mixing capabilities

(for separate ailerons).

Receiver

❏

Futaba 4 to 6 channel R146iP PCM receiver (FUTL0601)

❏