background image

2

TABLE OF CONTENTS

INTRODUCTION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

 

AMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

SAFETY PRECAUTIONS  . . . . . . . . . . . . . . . . . . . . . . . . .2
DECISIONS YOU MUST MAKE. . . . . . . . . . . . . . . . . . . . .3

 

Motor, Battery and ESC . . . . . . . . . . . . . . . . . . . . . . . .3

 

Servos, Receiver  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

 

Propeller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

ADDITIONAL ITEMS REQUIRED . . . . . . . . . . . . . . . . . . .4

 

Battery Chargers  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

 

Adhesives and Building Supplies . . . . . . . . . . . . . . . . .4

 

Optional Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

KIT INSPECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
KIT CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . .5

ASSEMBLY INSTRUCTIONS  . . . . . . . . . . . . . . . . . . . . . .5

 

Hook Up the Elevator . . . . . . . . . . . . . . . . . . . . . . . . . .5

 

Install the Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

 

Mount the Receiver  . . . . . . . . . . . . . . . . . . . . . . . . . . .8

 

Mark the Balance Range . . . . . . . . . . . . . . . . . . . . . . .9

 

Hook Up the Ailerons . . . . . . . . . . . . . . . . . . . . . . . . . .9

 

Mount the Landing Skids . . . . . . . . . . . . . . . . . . . . . .10

 

Apply the decals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

GET THE MODEL READY TO FLY  . . . . . . . . . . . . . . . . . 11
 

Set the Control Throws. . . . . . . . . . . . . . . . . . . . . . . . 11

 

Balance the Model (C.G.). . . . . . . . . . . . . . . . . . . . . .12

 

Balance the Model Laterally. . . . . . . . . . . . . . . . . . . .13

PREFLIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
 

Identify Your Model . . . . . . . . . . . . . . . . . . . . . . . . . . .13

 

Charge the Batteries  . . . . . . . . . . . . . . . . . . . . . . . . .13

AMA SAFETY CODE (excerpts)  . . . . . . . . . . . . . . . . . . .13

 

General  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

 

Radio Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

CHECK LIST  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
FLYING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
 

Mount the Wing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

 

Ground Check and Range Check  . . . . . . . . . . . . . . .15

 

Hand-Launch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

 

Flying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

 

Landing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

INTRODUCTION

Thank you for purchasing the Great Planes Rifl e ARF. 

Prepare to be thrilled! Before fl ying your Rifl e make sure 
you’re really ready; get a good night’s sleep and do what you 
can to optimize your reaction time and concentration level, 

because the Rifl e’s small size and extreme speed can cause 
it to get out of visual range within a few seconds! We’ve 
clocked it at average speeds of 90mph, but in actuality it 
seems like it’s going over 200! The Rifl e does fl y predictably 
and smoothly, so TOC (Tournament of Champions) skills 
are not required, but you still must be a competent pilot with 
the ability to remain calm and react decisively when being 
challenged. And even after you get used to your Rifl e, you’ll 

still breathe a sigh of relief after every landing, but you’ll 
become addicted to the speed and be ready for the next 
fl ight after you’ve calmed your nerves.

For the latest technical updates or manual corrections to 
the Rifl e visit the Great Planes web site at www.greatplanes.
com. Open the “Airplanes” link, then select Rifl e ARF. If there 

is new technical information or changes to this model a “tech 
notice” box will appear in the upper left corner of the page.

Academy of Model Aeronautics

If you are not already a member of the AMA, please join! 

The AMA is the governing body of model aviation and 

membership provides liability insurance coverage, protects 
modelers’ rights and interests and is required to fl y at most 
R/C sites.

Academy of Model Aeronautics

5151 East Memorial Drive
Muncie, IN 47302-9252

Tele. (800) 435-9262

Fax (765) 741-0057

Or via the Internet at:
http://www.modelaircraft.org

IMPORTANT!!!

 Two of the most important things you can 

do to preserve the radio controlled aircraft hobby are to 
avoid fl ying near full-scale aircraft and avoid fl ying near or 
over groups of people.

PROTECT YOUR MODEL, YOURSELF 

& OTHERS… FOLLOW THESE 

IMPORTANT SAFETY PRECAUTIONS

1.   Your Rifl e should not be considered a toy, but rather a 

sophisticated, working model that functions very much 
like a full-size airplane. Because of its performance 
capabilities, the Rifl e, if not assembled and operated 
correctly, could possibly cause injury to yourself or 
spectators and damage to property.

2.   You must assemble the model according to the 

instructions. Do not alter or modify the model, as doing 
so may result in an unsafe or unfl yable model. In a few 
cases the instructions may differ slightly from the photos. 
In those instances the written instructions should be 
considered as correct.

3.   You must take time to build straight, true and strong.

4.   You must use an R/C radio system that is in good condition, 

a correctly sized motor, and other components as specifi ed 
in this instruction manual. All components must be correctly 
installed so that the model operates correctly on the ground 
and in the air. You must check the operation of the model 
and all components before every fl ight.

Summary of Contents for Electrifly Rifle

















Reviews: