4
ADDITIONAL ITEMS REQUIRED
Required Hardware and Accessories
❍
(1) Dubro #554 X-Large Tygon Fuel Line (DUBQ0427)
❍
(1) R/C Foam Rubber (1/4" [6mm], HCAQ1000; or 1/2"
[13mm], HCAQ1050)
❍
Propeller and spare propellers suitable for your engine.
Adhesives and Building Supplies
This is the list of Adhesives and Building Supplies that are
required to fi nish the Escapade MX 30cc ARF.
❍
1/2 oz. [15g] Thin Pro CA (GPMR6001)
❍
Pro 30-minute epoxy (GPMR6047)
❍
Pro 6-minute epoxy (GPMR6045)
❍
Threadlocker thread locking cement (GPMR6060)
❍
Mixing sticks (50, GPMR8055)
❍
Mixing cups (GPMR8056)
❍
Epoxy brushes (6, GPMR8060)
❍
Denatured alcohol (for epoxy clean up)
❍
Masking tape
❍
Sandpaper
❍
Drill
❍
Drill bits: 1/16" [1.6mm], 5/64" [2mm], 3/32" [2.4mm], 1/8"
[3.2mm], 3/16" [4.8mm], 13/64" [5.2mm], 1/4" [6.4mm],
25/64" [10mm]
❍
Small metal fi le
❍
Stick-on segmented lead weights (GPMQ4485)
❍
Silver solder w/fl ux (STAR2000)
❍
Hobbico 60 Watt Soldering Iron (HCAR0776)
❍
#1 Hobby knife (RMXR6903)
❍
#11 blades (5-pack, RMXR6930)
❍
Rotary tool such as Dremel
®
❍
Rotary tool reinforced cut-off wheel (GPMR8200)
❍
DLE-30 Propeller Drill Guide (DLEQ0301)
Covering Tools
❍
Top Flite
®
MonoKote
®
Sealing Iron (TOPR2100)
❍
Top Flite Hot Sock Iron Cover (TOPR2175)
❍
Top Flite MonoKote Trim Seal Iron (TOPR2200)
❍
Top Flite MonoKote Heat Gun (TOPR2000)
❍
Coverite
®
21st Century
®
Sealing Iron (COVR2700)
❍
Coverite 21st Century Cover Sock (COVR2702)
❍
Coverite 21st Century Trim Sealing Iron (COVR2750)
Optional Supplies and Tools
Here is a list of optional tools mentioned in the manual that
will help you build the Escapade MX 30cc ARF.
❍
2 oz. [57g] spray CA activator (GPMR6035)
❍
CA applicator tips (HCAR3780)
❍
CA debonder (GPMR6039)
❍
36" metal ruler
❍
Pliers with wire cutter (HCAR0625)
❍
Robart
®
Super Stand II
™
(ROBP1402)
❍
Servo horn drill (HCAR0698)
❍
AccuThrow
™
Defl ection Gauge (GPMR2405)
❍
CG Machine
™
(GPMR2400)
❍
Precision Magnetic Prop Balancer (TOPQ5700)
IMPORTANT BUILDING NOTES
●
Anytime a sheet metal screw is installed in wood, fi rst
install the screw, remove the screw and apply a couple
of drops of thin CA in the hole to harden the threads.
After the CA has cured, reinstall the screw.
●
Anytime a threaded screw or nut is installed, a drop of
threadlocker must be applied to the threads. An exception,
do not use threadlocker on the screws installed in the
nylon control horns.
●
Denatured alcohol is great for cleaning epoxy from
surfaces before the epoxy cures
●
Replacement MonoKote colors
KIT INSPECTION
Before starting to build, inspect the parts to make sure they
are of acceptable quality. If any parts are missing or are
not of acceptable quality, or if you need assistance with
assembly, contact
Product Support
. When reporting defective
or missing parts, use the part names exactly as they are
written in the Kit Contents list.
Great Planes Product Support
3002 N Apollo Drive, Suite 1
Ph: (217) 398-8970, ext. 5
Champaign, IL 61822
Fax: (217) 398-7721
E-mail:
airsupport@greatplanes.com
ORDERING REPLACEMENT PARTS
Replacement parts for the Great Planes Escapade MX 30cc
ARF are available using the order numbers in the
Replacement
Parts List
that follows. The fastest, most economical service
can be provided by your hobby dealer or mail-order company.
Not all parts are available separately (an aileron cannot be
purchased separately, but is only available with the wing kit).
Replacement parts are not available from Product Support,
Jet White (TOPQ0204)
Black
(TOPQ0208)
Dove Gray (TOPQ0211)
True Red (TOPQ0227)
Summary of Contents for ESCAPADE MX 30cc
Page 32: ......
