GREAT PLANES Lancair ES, Instruction Manual

If you would like photos of the full-size Lancair for scale
documentation, or if you would like to study the photos to
add more scale details, photo packs are available from:

Bob’s Aircraft Documentation

3114 Yukon Ave

Costa Mesa, CA 92626

Telephone: (714) 979-8058

Fax: (714) 979-7279

e-mail: www.bobsairdoc.com

1. Your Lancair should not be considered a toy, but rather a
sophisticated, working model that functions very much like
a full-size airplane. Because of its performance capabilities,
the Lancair, if not assembled and operated correctly, could
possibly cause injury to yourself or spectators and damage
to property.

2. You must assemble the model according to the
instructions. Do not alter or modify the model, as doing so
may result in an unsafe or unflyable model. In a few cases
the instructions may differ slightly from the photos. In those
instances the written instructions should be considered as
correct.

3. You must take time to build straight, true and strong.

4. You must use an R/C radio system that is in first-class
condition, and a correctly sized engine and components
(fuel tank, wheels, etc.) throughout the building process.

5. You must correctly install all R/C and other components
so that the model operates correctly on the ground and in
the air.

6. You must check the operation of the model before every
flight to insure that all equipment is operating and that the
model has remained structurally sound. Be sure to check
clevises or other connectors often and replace them if they
show any signs of wear or fatigue.

7. If you are not already an experienced R/C pilot, you
should fly the model only with the help of a competent,
experienced R/C pilot.

8. While this kit has been flight tested to exceed normal use,
if the plane will be used for extremely high stress flying,
such as racing, the modeler is responsible for taking steps
to reinforce the high stress points.

Remember: Take your time and follow the instructions
to end up with a well-built model that is straight
and true.

If you have not flown this type of model before, we
recommend that you get the assistance of an experienced
pilot in your R/C club for your first flights. If you’re not a
member of a club, your local hobby shop has information
about clubs in your area whose membership includes
experienced pilots.

In addition to joining an R/C club, we strongly recommend
you join the AMA (Academy of Model Aeronautics). AMA
membership is required to fly at AMA sanctioned clubs.
There are over 2,500 AMA chartered clubs across the
country. Among other benefits, the AMA provides insurance
to its members who fly at sanctioned sites and events.
Additionally, training programs and instructors are available
at AMA club sites to help you get started the right way. Contact
the AMA at the address or toll-free phone number below:

This is a partial list of items required to finish the Lancair
that may require planning or decision making before
starting to build. Order numbers are provided in
parentheses.

The Lancair requires a minimum of a 5-channel radio and
receiver, plus: seven servos producing a minimum of 41oz.-
in of torque, two Y-harness connectors, two 24" [610mm]
and two 12" [305mm] servo extensions.

Radio Equipment

DECISIONS YOU MUST MAKE

Academy of Model Aeronautics

5151 East Memorial Drive

Muncie, IN 47302

Tele: (800) 435-9262

Fax (765) 741-0057

Or via the Internet at:

http://www.modelaircraft.org

We, as the kit manufacturer, provide you with a top
quality kit and instructions, but ultimately the quality and
flyability of your finished model depends on how you build
it; therefore, we cannot in any way guarantee the
performance of your completed model, and no
representations are expressed or implied as to the
performance or safety of your completed model.

PROTECT YOUR  MODEL, YOURSELF

& OTHERS...FOLLOW THESE

IMPORTANT SAFETY PRECAUTIONS

3