Optional Supplies & Tools
❏
Precision Magnetic Prop Balancer (TOPQ5700)
❏
CA applicator tips (HCAR3780)
❏
CA debonder (GPMR6039)
BUILDING NOTES
The stabilizer and wing incidences and motor thrust angles
have been factory-built into this model. However, some
technically-minded modelers may wish to check these
measurements anyway. To view this information visit the web
site at www.greatplanes.com and click on “Technical Data.”
Due to manufacturing tolerances which will have little or no
effect on the way your model will fl y, please expect slight
deviations between your model and the published values.
ORDERING REPLACEMENT PARTS
Replacement parts for the Seawind are available using the
order numbers in the Replacement Parts List that follows.
The fastest, most economical service can be provided by your
hobby dealer or mail-order company.
To locate a hobby dealer, visit the Hobbico
®
web site at
www.hobbico.com. Choose “Where to Buy” at the
bottom of the menu on the left side of the page. Follow the
instructions provided on the page to locate a U.S., Canadian
or International dealer.
Parts may also be ordered directly from Hobby Services by
calling (217) 398-0007, or via facsimile at (217) 398-7721,
but full retail prices and shipping and handling charges will
apply. Illinois and Nevada residents will also be charged
sales tax. If ordering via fax, include a Visa
®
or MasterCard
®
number and expiration date for payment.
Mail parts orders and payments by personal check to:
Hobby Services
3002 N. Apollo Drive, Suite 1
Champaign, IL 61822
Be certain to specify the order number exactly as listed in
the Replacement Parts List. Payment is by credit card or
personal check only; no C.O.D.
If additional assistance is required for any reason contact Product
Support by e-mail at productsupport@greatplanes.com,
or by telephone at (217) 398-8970.
Replacement Parts List
GPMA2730 Wing
GPMA2731 Fuselage
GPMA2732
Tail Surface Set
GPMA2733 Wing
Tips
GPMA2734 Canopy/Hatch
GPMA2735 Spinner
Set
(2)
GPMA2736 Cowl
GPMA2737 Decal
Set
4
To convert inches to millimeters, multiply inches by 25.4 (25.4mm = 1")
