5
❏
Hobbico 8-Piece Ball Tip Hex L Wrench SAE
(HCAR0520)
❏
Hobbico 7-Piece Ball Tip Hex L Wrench Metric
(HCAR0521)
❏
Great Planes Clevis Installation Tool (GPMR8030)
Building Stand
A building stand or cradle comes in handy during the build.
We use the Robart Super Stand II (ROBP1402) for all our
projects in R&D, and it can be seen in pictures throughout
this manual.
IMPORTANT BUILDING NOTES
• When you see the term
test fi t
in the instructions, it means
that you should fi rst position the part on the assembly
without using any glue
, then slightly modify or
custom fi t
the part as necessary for the best fi t.
• Whenever the term
glue
is written you should rely upon
your experience to decide what type of glue to use. When
a specifi c type of adhesive works best for that step, the
instructions will make a recommendation.
• Whenever just
epoxy
is specifi ed you may use
either
30-minute (or 45-minute) epoxy
or
6-minute epoxy. When
30-minute epoxy is specifi ed it is
highly
recommended that
you use only 30-minute (or 45-minute) epoxy, because you
will need the working time and/or the additional strength.
•
Photos
and
sketches
are placed
before
the step they
refer to. Frequently you can study photos in following steps
to get another view of the same parts.
• The stabilizer and wing incidences and engine thrust
angles have been factory-built into this model. However,
some technically-minded modelers may wish to check these
measurements anyway. To view this information visit the web
site at www.greatplanes.com and click on “Technical Data.”
Due to manufacturing tolerances which will have little or no
effect on the way your model will fl y, please expect slight
deviations between your model and the published values.
ORDERING REPLACMENT PARTS
Replacement parts for the Great Planes Shoestring .46 ARF
are available using the order numbers in the Replacement Parts
List that follows. The fastest, most economical service can be
provided by your hobby dealer or mail-order company.
To locate a hobby dealer, visit the Hobbico web site at www.
greatplanes.com. Choose “Where to Buy” and follow the
instructions provided on the page to locate a U.S., Canadian
or International dealer.
Parts may also be ordered directly from Hobby Services by
calling (217) 398-0007, or via facsimile at (217) 398-7721,
but full retail prices and shipping and handling charges will
apply. Illinois and Nevada residents will also be charged
sales tax. If ordering via fax, include a Visa
®
or MasterCard
®
number and expiration date for payment.
Mail parts orders and payments by personal check to:
Hobby Services
3002 N Apollo Drive, Suite 1
Champaign IL 61822
Be certain to specify the order number exactly as listed in the
Replacement Parts List. Payment by credit card or personal
check only; no C.O.D.
If additional assistance is required for any reason contact
Product Support by e-mail at productsupport@greatplanes.
com, or by telephone at (217) 398-8970.
Order No.
Description
NOTE
REPLACEMENT PARTS LIST
Fuselage
Wing Set
Tail Set
Canopy/Hatch
Cowl
Landing Gear
Wheel Pants
Wing Tube
Decal
GPMA3390
GPMA3391
GPMA3392
GPMA3393
GPMA3394
GPMA3395
GPMA3396
GPMA3397
GPMA3398
Full-size plans are not available.
You can download a copy of this
manual at www.greatplanes.com.
