background image

Hobbico

®

Pro Series

Accu-Cycle

Elite

Accu-Cycle Elite is an AC/DC charger, discharger and cycler in
one. It makes full, deep charges virtually effortless. Enter the cell
chemistry, voltage and capacity from your battery label, and its
Auto Smart Set will automatically set the safety-time-out period,
charge current and discharge voltage cut-off for Li-Ion/Li-Po
packs – and all three plus the trickle rate for NiCds and NiMHs.
You can also program custom battery routines and store them
in 10-battery memory. It can handle a single cell or a pack; one
of each simultaneously; or two cells or packs at once – even if
they’re of different chemistries. The large, 2-line,16-character
LCD make progress easy to see! HCAP0280

Great Planes ElectriFly 2000mAh Nickel-Metal
Hydride Battery 
Be ready for launching fast with this preassembled and
shrink-wrapped 9.6V NiMH pack! Made with 4/5 sub-C cells,
it’s compact and lightweight – but offers a generous
2000mAh of capacity for long flight times. Includes a 2-pin
red charge connector. GPMP0352

Great Planes ElectriFly 1500mAh Lithium Polymer Battery
Lithium-Polymer (Li-Po) cells provide three times the voltage
of NiCd and NiMH cells – at less than half the weight!
Exclusive SafeCharge

circuitry protects ElectriFly Li-Po

packs by preventing any cell from overcharging. This 11.1V,
3 series pack includes a 2-pin red charge connector and
separate discharge connector. GPMP0831

Kontronik

Brushless Set 480

This high-RPM, gear driven motor system is ideal for
sailplanes and larger electric airplanes using 7-10 cells.
Lithium compatible, it includes the Fun 480-33 motor; Jazz
40-6-18 electronic speed control; and KPG25 gear drive
with 4.2:1 gear ratio. This system also makes an excellent
choice for converting most .40-.60 size glow-powered
trainers and sport models to electric power! KONG5020

Great Planes C.G. Precision Aircraft Balancer
Accurate balancing makes trainers more stable, low-wings more
agile, and pylon planes move at maximum speed. The
innovative C.G. Machine helps you achieve optimum balance
easily, without measuring or marking–and without the errors that
fingertip balancing can cause.You’ll quickly pinpoint your plane’s
exact center of gravity. Then you’ll know at a glance whether
weight should be added, removed or relocated. The C.G.
Machine works with kits and ARF models of any size and
wingspan. Its slanted wire balancing posts support models
weighing up to 40 pounds. GPMR2400

19

Summary of Contents for Siren ARF





















Reviews: