15
❏
4. Make a hook and loop strap.
❏
5. Install the strap.
❏
6. Wrap the receiver and receiver battery in foam and
secure them to the radio tray with the hook and loop strap
and cut off the excess strap.
❏
7. Connect the receiver battery to the receiver switch.
Plug in the receiver switch, rudder servo and elevator servo
into the receiver.
❏
8. Switch on the transmitter, then the receiver. Center
the rudder and elevator trims on the transmitter. Position
the servo arms so they are perpendicular to the centerline
of the servos.
❏
9. Assemble a rudder and an elevator pushrod.
❏
10. Insert one of the pushrods in the fuselage for the
elevator.
❏
11. Attach a clevis to the control horn.
Summary of Contents for ULTRA SPORT 46
Page 31: ...Notes 31...
