9
8
Initial Start-Up
Initial Start-Up
6. And follow these steps on APP to complete the matching.
7. Repeat procedure for a second user, or to change
user details. There’s only one step differnt, like the
right picture.
Note: To update or overwrite the memorised data,
follow the same procedure, making changes as
required.
Select Measurement Unit
With batteries correctly installed, press “UNIT” button in the back of the scale to select
measurement unit. The default measurement unit is “lb”. You may press “UNIT” button to
choose among pound and kilogram.
Weight Only Operation
Greater Goods’ Body Fat Analyzer will operate as a conventional weight - reading
scale. No special programming steps are required.
Once the scale is initialized, as previously described, you may simply step on the
scale to measure your current weight. For only weight reading.
1. Position the scale on a flat, hard surface. Carpeted or uneven floors may affect
accuracy.
2. Step onto the scale platform and remain still while the scale computes your weight.
3. The scale will display your weight value.
4. The scale will automatically turn off after a few seconds.
1. Press the platform centre and remove your foot.
2. “0.0” will be displayed.
3. The scale will switch off and is now ready for use.
This initialisation process must be repeated if the scale is moved.
At all other times step straight on the scale.
Initialising Your Scale
Note: The weight value won’t be saved in the scale, and won’t be transmitted to the APP.
