9
Weigh to Sync
Once setup has been completed, simply weigh to sync measurements to
the cloud. Syncing will occur to your user account as long as your scale is
within range of your Wi-Fi router.
After weighing the Wi-Fi symbol will turn on and a syncing
animation will begin. The syncing animation will continue
until the Wi-Fi sync is complete.
The data symbol indicates measurement data is waiting to be
synced to your device. Upon successfully syncing, this will go
away. If measurements are not synced, it will display the next
time you weigh, indicating unsynced measurements.
Sync With Your Scale
Force Sync
If for some reason your weights do not sync automatically, you can force
sync them using the following steps:
1.
Press-Awake the scale.
2. Press and hold the UP ARROW for three seconds.
3. Use the arrows to select SYnC, then press SET. This will force
the scale to attempt to sync all weight entries still on the scale.
Tips
Your scale will give an audible beep when it turns on, when
measurements are completed, and once again when it has successfully
synced to your device. If syncing cannot be completed at the time,
three short beeps will indicate a failed sync. If a failure occurs, your
measurements will store in the scale and attempt to sync the next time
you complete weighing.
