12
Low Battery
A low battery symbol is displayed when the batteries need to be
replaced. Open the battery door on the back of the scale, and remove
and replace the batteries with four AAA batteries.
Overload
Dashes are displayed when overload occurs and the scale has
too much weight (Capacity: 180kg / 397lb). Please remove the weight
from the scale to protect the scale sensors.
Measuring Error
If the scale has trouble measuring your weight, it will turn off. This is most
likely due to not settling on the scale fast enough. Make sure that the
scale is placed on a hard flat surface (not carpet) and that you distribute
your weight evenly while holding still.
Resolving An Auto-Detection Conflict
An Auto-Detection conflict will occur if two or more users are within 10lbs
of each other. When an Auto-Detection conflict occurs, your scale will
give you a chance to select your profile number manually. Use the arrows
to select your profile, tap SET, and step on the scale. The scale will now
proceed measuring for the profile you have selected.
How Do I Clear A User Profile On My Scale?
First, Press-Awake the scale on, then press and hold SET. Now, select the
user to delete and press SET. Once selected, press the up arrow to change
Clr to “Y.” Now press SET to clear the user. The user is now removed.
Scale Troubleshooting
