GRECH MOTORS
10
The vehicle driver should test the Obstruction Sensing System every day before putting the vehicle into
service. To test the System, the vehicle driver should:
1. Activate the Door Command Button to move the door into its fully opened position.
2. While keeping the passenger doorway clear of objects and passengers, the vehicle driver should
create an obstruction in the doorway by placing a piece of wood or other debris in the door’s
path.
3. Next, the vehicle driver should attempt to close the passenger door by activating the Door
Command Button.
4. If the passenger door contacts the obstruction and fails to stop once it makes contact,
call the
Grech Motors Service Department at
1-855-994-7324
and do not operate the vehicle
.
5. If the passenger door stops and re-opens without seeming to contact an obstruction,
call the
Grech Motors Service Department at
1-855-994-7324
and do not operate the vehicle
.
6. If the passenger door contacts an obstruction, stops, re-opens and closes, and if it continues
repeating this process without stopping in the open position after the third cycle,
call the Grech
Motors Service Department at
1-855-994-7324
and do not operate the vehicle
.
7. If the passenger door fails to close when the operator puts the vehicle into gear,
call the Grech
Motors Service Department at
1-855-994-7324
and do not operate the vehicle
.
The Obstruction Sensing System Test Procedure
Vapor Electric Door Operational Safety Check List
