GRECH MOTORS
25
Filling Water Tank & Water for Lavatory
Filling the Water Tank
Use the following steps to fill the water tank which supplies water to the lavatory
Open the
Water
Fill
compartment.
Remove cap on fill neck.
Insert hose into fill neck.
Turn on water, water comes
out of overflow when full.
Turn off water.
Note:
When you are done filling the tank,
replace the cap and close the Water
Hose compartment Door.
Water for the Lavatory
The lavatory water pump
switch must be in the “ON”
position in order for the toilet
to flush and for water to be
supplied to the sink.
Note:
Never run the pump
dry. Damage to the pump
will occur.
Note: EG Water Fill
located behind
rear license plate
Low Water Indicator
Note:
Water pump will not
operate when Low Water
Indicator is iluminated.
Pump Switch
Over Flow
Water Fill