Gree Crossover GWH09AGC-D3DNA1B/O, Operation Manual

13

OPERATION GUIDE

TURBO MODE

Allows the indoor unit to run at super-high fan speed to cool or heat so that the ambient temperature reaches 

the set temperature much quicker. 
While 

Cooling

 or 

Heating

 mode, press the 

TURBO

 button (   ) in the remote control to activate the function. 

The symbol "   " will appear on the display screen of the remote control. Pressing the button again will 

deactivate the 

Turbo

 function. 

HORIZONTAL SWING SETTING

Allows the user to adjust the louvers of the indoor unit to a fixed angle in accordance with their needs.

Press the 

HORIZONTAL SWING

 button ( 

 ) on the remote control to select the desired fixed angle. By 

pressing the button in rapid succession of less than 2 seconds, the setting options cycle through in the fol-

lowing  order :

VERTICAL SWING SETTING

Allows the user to adjust the airflow deflectors of the indoor unit to a fixed angle or to continuously swing in 

accordance with their needs.
Press the 

VERTICAL SWING

 button ( 

 ) on the remote control to select the desired fixed or sliding angle. 

By pressing the button in rapid succession of less than 2 seconds, the setting options cycle through in the 

following  order :

 NOTE : 

Some angle options are only available for certain models.

When the parameter switches from " OFF " to " 

 ", if you delay pressing the button for more than 2 sec

-

onds, the parameter will automatically revert to the " OFF " state.
Holding the button down continuously for more than 2 seconds will cause the airflow deflectors and louvers 

to automatically swing back and forth, and sides to sides. When the button is released, the unit stops swing-

ing at the current angle, providing the user with a personalized fixed angle.

When the parameter switches from " OFF " to " 

 ", if you delay pressing the button for more than 2 sec

-

onds, the parameter will automatically revert to the " OFF " state.
When selecting the parameter " 

 ", the airflow deflectors will continuously swing up and down at maxi

-

mum angle.

OFF

 / no display 

(deflectors stop at 

current position)

OFF

 / no display 

(louvers stop at  

current position)