Main switch operation procedure
1.Main Control Knob
Set to Low Cool,
Med Cool or High Cool as desired (FAN setting operates the fan only.)
2.Thermostat control Knob
Set the thermostat control knob to your desired setting
(Usually 6-7 is recommended),
If the room temperature is
not as desired after a reasonable period,
turn the thermostat.
When the thermostat control know is set to 10moisture
may freeze onto evaporator fins and the thermostat control knob counter clockwise
This will quickly defrost the
evaporator fins so that mormal cooling can be resumed.
CAUTION:
If the main control knob is turned off of changed to a fan setting from a cooling operation setting.
WAIT at
least
3 minutes before resetting to cooling operation.
-9-
Summary of Contents for G1707M
Page 24: ...66129924530 ...