174
Disassembly of Outdoor Unit
9K 240 volt unit
Warning - Wait 10 minutes after power is disconnected before starting disassembly
.
Loosen the screws of the clapboard sub-assembly.
The clapboard sub-assembly has a hook on the
lower side. Lift and pull the clapboard sub-assembly
to remove.
Unscrew the attached nut of the 4-way valve assem-
bly coil and remove the coil. Wrap the 4-way valve
assembly with wet cotton and unsolder the four
weld spots connecting the 4-way valve assembly to
take it out (Note: Refrigerant should be discharged
first). Welding process should be as quick as possi-
ble and keep wrapping wet cotton all the time. Be
sure not to burn out the lead wire of the compres-
sor.
10. Remove clapboard sub-assy
11. Remove 4-way valve
Remove the three footing screws of the compressor
and remove the compressor.
12. Remove compressor
