21
Product Introduction
2. Clock Timer (it’s optional for the remote controller with clock timer)
Timer ON
If timer ON is set during operation of the unit, the unit will continue to operate. If timer ON is set at unit OFF, upon
ON time reaches the unit will start to operate according to previous setting status.
Timer OFF
If timer OFF is set at unit OFF, the system will keep standby status. If timer OFF is set at unit ON, upon OFF time
reaches the unit will stop operation.
Timer Change
Although timer has been set, the unit still can be turned on/off by pressing ON/OFF button of the remote controller.
You can also set the timer once again, and then the unit will operate according to the last setting.
If timer ON and timer OFF are set at the same time during operation of the unit, the unit will keep operating at cur-
rent status till OFF time reaches.
If timer ON and timer OFF are set at the same time at unit OFF, the unit will keep off status till ON time reaches.
Each day in future, the system will operate according to preset mode till OFF time reaches and stop operation till ON
time reaches. If ON time and OFF time are the same, OFF command takes the priority.
time and OFF time are the same, OFF command takes the priority.
(2) Auto Button
If this button is pressed, the unit will operate in AUTO mode and indoor fan will operate at auto speed; meanwhile,
the swing motor operates.
Press this button again to turn off the unit.
(3) Buzzer
Upon energization or availably operating the unit or remote controller, the buzzer will give out a beep.
(4) Sleep Function
1. Cooling mode:
1.1 When initial ial set temperature range is 61~73°F, if turning on sleep function, temperature will increase 1.8°F for
every hour. After 5.4°F has been increased, the temperature will not change. 7 hours later, temperature will decrease
1.8°F. After that, the unit will keep operating at that temperature.
1.2 When initial set temperature range is 75~81°F, if turning on sleep function, temperature will increase 1.8°F for
every hour. After 3.6°F has been increased, the temperature will not change. 7 hours later, temperature will decrease
1.8°F. After that, the unit will keep operating at that temperature.
1.3 When initial set temperature range is 82~84°F, if turning on sleep function, temperature will increase 1.8°F for
every hour. After 1.8°F has been increased, the temperature will not change. 7 hours later, temperature will decrease
1.8°F. After that, the unit will keep operating at that temperature. 1.4 When initial set temperature is 86°F, th
e unit
will operate at that temperature. 7 hours later, temperature will
decrease 1.8°F. After that, the unit will keep oper-
ating at that temperature.
2. Heating mode:
2.1 When initial set temperature is 61°F, the unit will operate at that temperature;
2.2 When initial set temperature range is 63~68°F, if turning on sleep function, temperature will decrease 1.8°F for
every hour. After 1.8°F has been decreased, the temperature will not change.
2.3 When initial set temperature range is 70~81°F, if turning on sleep function, temperature will decrease 1.8°F for
every hour. After 3.6°F has been decreased, the temperature will not change. 2.4 When initial set temperature range is
82~86°F, if turning on sleep function, temperature will decrease 1.8°F for every hour. After 5.4°F has been decreased,
the temperature will not change.
(5) Turbo Function
This function can be set in cooling or heating mode to quickly cool or heat the room.
Basic Functions - 9K & 12K 115 volt
