CE INFORMATION
ACTION TYPE: IB
POLLUTION SITUATION: NORMAL
CLASS
2
INSULATION:
:MICRO-DISCONNECTION LIVE
POLE ONLY
MANUAL OVERRIDE
SUMMER TIME SETTING
TIMER COUNTDOWN
FUNCTION
1. Timer has a 100 hour countdown feature i.e. the
timer can be set to any period from 1 minute to
100 hours and will countdown in the ON state
and turn OFF at the end of the countdown
period.
2. Press the Y button then use the + or - button to
select the “down” icon on the right hand side
of the display, press Y again to enter the count
down mode.
3. Use the + or - button to adjust the hours and
press Y to confirm. minutes will flash.
4. Use the + or - button to adjust the minutes and
press Y to confirm and complete the
countdown time setting.
5. Press the N button to start the countdown.
6. Output switched to ON during the countdown
period.
7. Press the N button to pause the countdown
(output switched to OFF)
8. To resume countdown simply press the N button
again.
9. Press and hold the N button for more than 3
seconds to exit the countdown function.
1. When in normal clock mode, pressing the N
button will scroll through the following switching
options.
• ALWAYS ON - timer is permanently ON.
•
PROG - timer is in programme ON mode,
will switch off at the next programme OFF time.
• ALWAYS OFF - timer is permanently OFF.
• PROG - timer is in programme OFF mode,
will switch on at the next programme ON time.
1. Press the Y button, then use the + or - buttons to
scroll through to “summer” (flashing).
2. Press the Y button again to access the summer
time setting.
3. Press the + or - button to change between
summer on or off.
4. Press Y to confirm summer setting, time will
advance 1 hour.
5. A “SUMMER” icon will appear in the display.
6. Use the same procedure to remove the
“SUMMER” icon when reverting to GMT in the
winter.
TECHNICAL INFORMATION
RESET
READING YOUR
PROGRAMMED TIMES
Pressing the reset button R with a pencil or similar
will reset all programmed times and set time of
day to zero.
1. Press Y button twice to enter programme
mode.
2. Press the + or - buttons to scroll through the 24
ON/OFF programmes to check settings.
3. Press the N button to exit and revert to clock
mode.
3. Default is programme 01 ON, this can be
changed if required by pr or - button to
scroll through the 24 ON/OFF programmes as
required, pressing the Y will confirm the
programme.
4. Press the Y button to confirm programme 01
ON, hours will flash.
5. Use the + or - button to adjust the hours and
press Y to confirm, minutes will flash.
6. Use the + or - button to adjust the minutes and
press Y to confirm, days will flash.
7. Apart from individual days of the week, the
following day combinations of multiple day
blocks can be selected by pressing the + or -
buttons.
• Monday to Sunday
• Monday to Friday
• Saturday to Sunday
• Monday to Saturday
• Wed Friday
• T Th Saturday
• T Wednesday
• Th Saturday
8. Select day or day block as required and press
the Y button to confirm.
9. Press the + button, this will select the
programme 01 OFF, press Y to confirm.
10.Follow 4 to 7 above to set the 01 OFF
programme (day or day block must be the
same as programme ON).
11.If no more programmes are required, press the
N button to exit.
12.If more programmes are required follow step 3.
13.To cancel a programme once set, press and
hold the N button for more than 3 seconds
when the desired programme number is
flashing i.e. to cancel programme 01 ON, press
the Y button twice and hold the N button down
for more than 3 seconds to delete. Pressing the
+ button again will select 01 OFF.
14.Repeat 13 to delete 01 OFF. This procedure can
be repeated to delete any of the 24
programmes.
Issu
e n
o:
70
52
14
WEST ROAD . HARLOW
ESSEX . CM20 2BG . UK
info@greenbrook.co.uk
www.greenbrook.co.uk
GUARANTEE
Your GreenBrook 7 Day Electronic Timer
is guaranteed for 1 year from
the date of purchase.
This is in addition to your statutory rights.
PLEASE KEEP THESE INSTRUCTIONS
SAFE FOR FUTURE REFERENCE
Switching Capacity:
230V AC, 16A resistive,
2A Inductive
Ambient Temperature:
-10°C to + 55°C
Battery Back Up:
150 hours
Memory Location:
24
Shortest Switching Time: 1 minute
Wattage:
3000W
Conforms To:
BS EN 60730-1,
BS EN 60730-2-7
T106A-C Ins Feb 18.qxp_Layout 1 23/02/2018 14:06 Page 2
