Pellet burner GP 45 IV 43
Regular cleaning of the burner’s components and modules ensure its reliable and
economic operation, and conditions for long life operation.
6.11. SAFETY AND UNPREDICTED RISKS.
Risks related to the “GP” burner usage:
The automated pellet burner from series “GP” is designed and manufactured in compliance
with the major safety European standards and directives. Danger conditions may occur in the
following situations:
The automated pellet burner from series “GP” has been improperly used;
The pellet burner is installed by unqualified personal;
The instructions for safe usage, presented in this manual, are not observed;
Unpredicted risks:
The pellet burner from series „GP” is designed and manufactured in compliance with the
acting safety standards. Although all possible risks, resulting by its improper usage, are
preliminary considered, it is possible that the following situations may occur:
Risks of burning, caused by the high temperature from the burning process in the
combustion chamber, during cleaning the burning zone or unburned material in the
fire-grate;
Risks of electrical shock from indirect contact. The pellet burner from “GP” series
is connected to the electrical network and the control modules are positioned in the
control board, equipped with the necessary safety devices, protecting against
overload and short circuit. The burner ground connection is mandatory and must
be performed by an authorized technician. Opening the burner’s protection cover
by unauthorized person is strictly forbidden;
Risks of finger injuring during works of maintenance and cleaning. It is
recommended to use proper personal safety equipment;
Risk of strangulation in case of insufficient chimney draught, clogging of the
convection line of the boiler, to which the burner from series “GP” is mounted, or
improper sealing of the flue pipeline.
6.12. COMPLETING THE BURNER’S WARRANTY CARD.
The attached WARRANTY CARD has to be completed by filling in all of the
required information in its fields. The stamp and signature fields have to
be also completed in order to ensure the pellet burner from series “GP”
WARRANTY CARD VALIDITY.
