Three-Phase UPS (10kVA-160kVA) Series
User Manual
8 Package, Transportation, Storage
95
8 Package, Transportation, Storage
This chapter mainly describes package, transportation, storage.
8.1 Package
The package of product is carton. When packing, pay attention to the placing direction requirements.
On the sides of carton, it should print warning icons, including keep dry, handle with care, this end up,
stacking layer limit, etc. and the device model. Print the logo of company, direction mark, ISO
authentication on the front and rear of the carton.
8.2 Transportation
Pay attention to warnings on the carton .Don't impact severely when transportation. In case of UPS
damage, it should follow the placement that shows on the carton. Don't carry UPS with the objects
that inflammable, explosive, or corrosive. Don't put UPS on the open-air storage when midway
transshipment. Leaching and mechanical damage by rain, snow or liquid objects is prohibited.
8.3 Storage
When storing UPS, it should follow the placement that shows on the carton. The gap is 20cm
between the carton and ground and the clearance is at least 50cm from carton to wall ,heat source,
cold source, windows or air inlet.
The storage environment temperature is -20
～
50
℃
. The relative humidity is 0%
～
95%. In
warehouse, It's prohibited that there has poisonous gas, objects that inflammable and explosive,
corrosive chemical objects. Besides, it shouldn't have too strong mechanical shaking, impact and
strong magnetic field. Under the storage conditions above, the storage period is six months Beyond
six months, it has to recheck. When long term storage ,it should charge battery every three months
