TROUBLESHOOTING
f at the mains.
FAULT
Unit will not work at all
Sensing range too short
Lamp on all the time
Lamp false triggers
POSSIBLE CAUSE
• No power
• Area too light
• Re-position lantern
e.g. lighting nearby
• Faulty photocell
low, or angle of approach
into detection bands are
incorrect
• Other lighting interfering
with the sensitivity of the
PIR sensor
• Wrongly wired
• PIR is continuously being
activated
• Faulty electronic unit
• Lantern badly positioned
• High winds
SOLUTION
• Check power and fuse
• Cover the sensor with a black
cloth or black insulation tape
and switch on
• Re-position lantern
if required
• Call the Helpline
• Cover the photo cell with
a dark cloth then test
• Move the unit to a different
height and/or change the
angle of approach
(see INTRODUCTION)
• Move lantern away from
other lighting
• Reposition lantern
•
Call the help line
• Reposition lantern.
• Temporary situation
If annoying, switch lantern off
Please note that this equipment and its components have NO user serviceable parts.
GREEN LIGHTING HELPLINE TEL:01905 610200
Monday to Friday
www.greenlighting.co.uk
For this reason we reserve the right to make changes to any product at any time, without notice.
Green Lighting Instructions GL4689LU P-Lux3 LED 2014
Green Lighting tries to improve its products for the benefit of its customers.
© Green Lighting 2014
• Switch off for 30 seconds
then restart
Blue LED indicator
doesn’t work
• No power
• Call the helpline
• Check power and fuse
