Microinverters maximize PV energy production
Each photovoltaic module has individual maximum peak power tracking (MPPT)
controls. This ensures that the maximum power produced is independent of the
performance of other PV modules in the installation.
When photovoltaic modules are affected by shadow, dust, orientation or any
situation in which one module underperforms compared to other units, the
microinverter ensures the highest efficiency, maximizing the performance of
each module.
More reliable than series inverters.
Distributed microinverter system ensures that there is no single failure affecting
the entire system. The inverter housing is designed for outdoor installation and
complies with IP67 protection class.
Easy to install
Individual photovoltaic modules can be installed in any combination, number,
orientation and different types. The ground wire (PE) of the AC cable is connec-
ted to the housing inside the microinverter, potentially eliminating the use of a
ground wire (check local ordinance).
The MPL MicroPV Gate energy storage device (MECD) is installed by plugging it
into any wall outlet and providing a broadband Ethernet connection to a router
or modem. Once installed and set up (see ECD manual), the entire network of
microinverters automatically reports to the Solarman web server. The software
displays performance trends, abnormal situation information and controls sys-
tem shutdown when needed.
Introduction to the microinverter
Microinverters connect to a single-phase grid, and can also use multiple
microinverters in a single-phase grid to achieve a three-phase grid, and work
with most 60 and 72 cell PV modules. Please refer to the technical data page
(16~21) of this manual for more information.
Model
number
AC system
ModulePV
Max. # per
branch
600G
50/60Hz, 230V
60,72 cell
8 for 25A circuit
breaker
1300G
4 for 25A circuit
braker
-5-
