4. Enable Network Address Translation (NAT) service.
5. Select “Application”
6. In the application page, key in the Gateway IP address information as following
example.
＊
Select “HTTP” as Service Name.
＊
Select Port 80 as your Gateway port selection
＊
Key in the IP address of the gateway
＊
Press apply to finish NAT setup
7. Once NAT service of the router is setup, user can access the gateway
anywhere from internet by opening IE web browser and key in the fix public
IP address provided by your internet service provider
GREEN POWERLINK On-Line Energy Management Solution V1.0
28
GREEN POWERLINK On-Line Energy Management Solution V1.0
29
