©April 2017
Call Toll free at (800) 269-7130
CIR-RB7000-G1 Revision 1.2
15
UNPACKING & ASSEMBLY
Step7: Assembly console with handle bar post
1).Please take off pre-lock console screws on the mast.
2).Put the console into the mast and connect upper and lower wires, such as console wires
、
hand
pulse wires
3). Use Allen wrench (6mm) to lock 4pcs M5*12mm screw on the console mast.
X1
#4-30
X4
#3-13
M
5
x
12
mm
Upper handle pulse wire
Upper console wire
Lower console
wire
Lower handle
pulse wire
Allen wrench
(6mm)