www.GreenSeriesFitness.com
©May 2015
Call Toll free at (800) 269-7130
CIR-TM7000E-G Revision 1.1
2
Step 1
- Unplug the power cord from the wall and from the treadmill base unit. #1 Phillips screw driver needed for screw
holding power cord to treadmill frame with metal sure connect. Place metal sure connect and small screw in a
small container ie. Soup Bowl.
Step 2
– Take six screws off the treadmill hood to the frame with a #2 Phillips screw driver and put in a small container
ie. soup bowl.
Step 3
– Slide the left and the right hood/rail cover halfway up the rails and secured using the rubber grommets half up
/ half down so they won't slide down.
