CIP 1500 – User and Maintenance Manual
18
Chapter
10
USING THE MACHINE
CAUTION!
It is essential that nobody is walking or staying in the
machine working area except for the operator in charge.
CAUTION!
CAUTION! Avoid approaching the in-feeding section
with hands.
Take all precautions to avoid hooking with the material
dragged into the machine. If necessary, reverse the rotating
direction of rollers by pushing forward the control lever of
the distributor.
10.2 Control lever device
This device allows the operator to
control the 2 in-feeding rollers.
Position 3 “FORWARD”
The rollers drag the material towards
the working disk.
Position 2 “STOP”
The rollers are stopped, thus halting
the material in-feeding towards the
working disk.
Position 1 “BACKWARD”
The rollers run in the reverse direction,
thus removing the material from the
working disk.
