CIP 1500 – User and Maintenance Manual
19
Chapter
10
USING THE MACHINE
CAUTION!
It is essential that nobody is walking or staying in the
machine working area except for the operator in charge.
CAUTION!
Risk of injury
Carrying out the above mentioned operations require
wearing safety gloves, goggles or face shield, ear protectors
and safety shoes.
CAUTION!
CAUTION! Avoid approaching the in-feeding section
with hands.
Take all precautions to avoid hooking with the material
dragged into the machine. If
necessary, reverse the
rotational direction of rollers by pushing forward the control
lever of the distributor.
Start the engine by following the
procedure indicated in the specific
handbook and let it warm a few
minutes at low speed rate.
Pull the control lever of the distributor
to the “
FORWARD
” position
(3):
the
in-feeding rollers start running
(A)
.
Put the material into the loading
hopper.
The material in-feeding towards the
cutting disk is automatically controlled
when the material comes in contact
with the hydraulic rollers.
NOTE: Take all precautions required to avoid hooking with the material
dragged into the machine.
If necessary, reverse the rotational direction (B) of rollers by pushing the
control lever of the distributor to the “BACKWARD” position (1).
A
B
