CIP 1500 – User and Maintenance Manual
6
Chapter 2
INFORMATION
GENERAL INFORMATION CONCERNING THE USER MANUAL
2.1 Introduction
This Manual intends to be a sound reference and working tool to get
knowledge of the machine and its use: it is recommended that you read it
carefully before starting the machine operation.
Each machine is delivered with its own
USER MANUAL.
The user is responsible for handling of this Manual during the whole lifetime of the
machine and it may be disposed of only when its related machine is dismantled.
The company
Green Produzione
is not liable for any tampering with this Manual or
any change applied to the machine by the User, after its delivery, and not envisaged
by this Manual.
The Manufacturer reserves all intellectual property rights covering this Manual; its
disclosure, either integral or partial, in any way whatever (printing, photocopy,
microfilm or any other means) is prohibited; the same is also for its working out,
reproduction or distribution through systems, legal entities or natural persons, without
getting prior approval and registration.
2.2 Reference
Standards
When drawing up this manual, the directions included in the following standards have
been considered:
EC-Directive 2006/42/EC, Attachment and amendments
UNI EN ISO 12100 - 1 – Safety of the Machinery: Terminology
UNI EN ISO 12100 - 2 – Safety of the Machinery: Specifications and technical
principles.
2.3 Scope of this Manual
Purpose of this Manual is to give the User some instructions and information to be
thoroughly followed and put in practice in order to assure a correct use of the
machine and protection and safety to the operator interacting with the machine itself.
For this reason, the following is recommended to the User:
Make this Manual available on work and have all operators acquainted with it.
Transfer the Manual to the future owners of the machine.
