29
EN
BLADE
Clean the bar groove after each use. Clean the lubrication hole with chain oil.
Check that the front wheel has not loosened: if it has loosened, the guide bar must be replaced. Check the guide bar
for nicks. Remove any nicks or burrs with a flat file. Check the tip of the guide bar for wear. If it is worn on one side
only, turn it over. If it is worn on both sides, replace the guidebar with a new one.
Check the bar groove for wear by shaking the chain. If it wobbles, you will need to replace the blade.
MAINTENANCE SCHEDULE
DAILY CHECK
Chain tension
Before each use, check
Chain sharpening
Before each use, visual check
Oil level
Before each use, visual check
INSPECCIONE Y LIMPIE
Blade
Before each use
Chain
After each use
TRANSPORT AND STORAGE
•
Allow the equipment to cool down completely before transporting or storing it.
•
Always store the product in a clean, safe, dry place with temperatures between 0º and 45ºC.
•
The equipment is not weatherproof and must not be stored in direct sunlight, at high temperatures or in damp
locations.
•
Never store the equipment in places where flammable materials, combustible gases or combustible liquids, etc.
are present.
•
Always store the machine with the cutting element guard fitted.
•
To reduce the risk of fire, keep the machine clean by removing material, oil and grease.
•
Store the machine out of the reach of children.
DISPOSAL AND RECYCLING
Worn products are potentially recyclable and should not be disposed of in the regular trash. Please help us to protect
the environment and preserve natural resources.
Dispose of the appliance in an environmentally friendly manner. Do not throw it away with household waste. Its plastic
and metal components can be separated and recycled. Please take this appliance to an approved recycling centre.
The materials used in the packaging of the machine are recyclable: please dispose of them in the appropriate container.
Summary of Contents for GS240C /-1
Page 2: ......
Page 45: ...PT 45 ...
Page 46: ...www greencut tools com Manual revisado en mayo de 2022 ...
