50
•
We recommend the use of:
-
Safety glasses.
-
Hearing protection.
-
Resistant and non-slip gloves.
-
Dust mask.
SAFETY IN THE WORK AREA
•
Do not use the machine at extreme temperatures or in excessively humid environments.
•
Do not use this machine in explosive atmospheres in the presence of flammable liquids, gases and dust.
•
Keep the work area clean and well lit. Cluttered, dark areas can cause accidents.
•
Remove all objects from the work area before starting this machine. Objects near the product may be touched
and projected by the machine causing personal injury.
•
Keep children, people, or animals away while operating this machine.
•
Remember that the machine operator is responsible for hazards and accidents caused to other people or things.
Under no circumstances shall the manufacturer be liable for damage caused by improper or incorrect use of this
machine.
ELECTRICAL SAFETY
•
This equipment may be a potential source of electric shock if used improperly.
•
Make sure all power supplies meet equipment voltage requirements before connecting or disconnecting
equipment.
•
Keep the machine away from water and excessive moisture.
•
Do not use electrical cords to lift, move, or transport equipment.
•
Make sure that the electrical cables do not present a risk of tripping.
SAFETY IN MAINTENANCE, TRANSPORT AND STORAGE
•
Do not modify product controls.
•
Check regularly for broken parts or other conditions that may affect the proper operation of the machine.
•
Replace worn or damaged parts immediately with original spare parts only.
•
Carry out regular maintenance on the machine. Do not attempt any maintenance or repair work not described
in this instruction manual. We recommend that maintenance and repairs not described in this manual are carried
out by the Official Technical Service.
•
At the end of the work, always clean the machine of dust and dirt.
•
Turn off and disconnect the machine completely before making any adjustments, changing accessories, servicing,
transporting, or storing this machine.
•
Do not clean the equipment with solvents, flammable liquids or strong abrasives.
•
Transport the machine through the base. Do not move it by pulling on the power cord.
•
The equipment is not weather resistant, and should not be stored in direct sunlight, high ambient temperatures,
or in humid or wet locations.
•
Store the product out of the reach of children.
SERVICE
•
Have the product checked periodically by a qualified technician and use only original spare parts. If you have any
questions, please contact the Official Technical Service.
Summary of Contents for LJ400C
Page 2: ......
Page 78: ......
Page 79: ......
Page 80: ...www greencut es Manual revisado en noviembre de 2018...
