background image

INSTALLATION INSTRUCTIONS

 

Model: 

Name: 

During installation, please be sure to also refer to guidelines in Greenfields’ Preliminary Instructions document. 

© 2015 Greenfields Outdoor Fitness, Inc. 

In order to honor our commitment to quality and safety, Greenfields Outdoor Fitness reserves the right to make changes and revise the design specifications without notice.

Questions? Please call 

888-315-9037 x105

Dimensions

Greenfields installation instructions:

1. All units MUST be fully assembled, 

leveled, and braced in place in the foot

-

ing hole before any concrete is poured.

2. A monolithic pour MUST be used for 

concrete. (All concrete must be poured 

at one time)

3. Concrete requirement: 3250 psi or better.

4. The top of the blue tape attached to the posts on the 

equipment is final top surface level.

5. All screws must be attached using LocTite.

6. It is recommended to wait a minimum of one week 

after concrete is poured before equipment is used.

7. The use of Decomposed Granite Surfacing (DG) is known 

to accelerate normal wear & tear of footrests.

 GR2005-1-71

 3-Person Static Combo

This unit ships in 4 separately wrapped components.

24"

24"

24"

24"

20"

20"

20"

62"

52"

Optional Top

Surfacing

Surface

Level

24"

24"

24" 20"

4" under

concrete

84"

Recommended Height

Finished product

Summary of Contents for GR2005-1-104





















Reviews: