13
SIDE ASSEMBLY
1.
Slide the glazing rubber into the channels of the glazing
bars and trim to correct length before assembly.
2.
Lay out the pieces on the ground as though you were standing
inside the greenhouse, i.e. with the gutter and cill facing
downwards and the bolt channels of the glazing bars upwards.
3.
Slide a 10mm bolt into the top of each end of the glazing bar
(Diagram bottom right). An extra bolt will have to be fed into
each channel (Diagram D, Page 15) to accommodate your ex-
tra strengthening cantilever bracings or anything else that may
require extra bolts (e.g. a shelf). Slide longer 15mm bolt into
the bottom of each glazing bar so a base bracket can be
attached at a later stage.
4.
Fix the cill to the middle glazing bar by pushing the 15mm bolt through the hole in the cill
unit and lightly tighten.
5.
Correctly position the cill on the outermost glazing bars by pushing the 15mm bolts through
the holes in the cill, now place the base brackets followed by the diagonal bracings on the
same bolts so they point outward towards the ends of the gutter and lightly tighten the nuts
(Diagram C, Page 15).
6.
On buildings larger than 6’ long you will need to attach
additional glazing bars to the cill in the same way as step 5.
7.
Attach the gutter to the glazing bars in the same manner as
step 4 and lightly tighten.
8.
Attach the other ends of the braces to the hole in the gutter
approximately 100mm from the end. Put the nuts on the bolts
and lightly tighten.
9.
Do the same with the other side frame assembly.
10.
Make sure that the glazing bars reach both the cill and the gut-
ter in each case.
11.
Finally tighten all nuts.
447
570
447
576
EXTERNAL VIEW
570
Part Name
Part
Length
8 X 6
8 X 8
8 X 10
8 X 12
No.
mm
Base bracket
300
-
2
4
4
6
Bracing, diagonal - 6' & 8' W
303
1,742
4
4
4
4
Cill, side 6' L
351
1,888
2
-
-
-
Cill, side 8' L
352
2,508
-
2
-
-
Cill, side 10' L
353
3,128
-
-
2
-
Cill, side 12' L
354
3,748
-
-
-
2
Glazing bar, side
447
1,670
4
6
8
10
Gutter 6' L
461
1,888
2
-
-
-
Gutter 8' L
462
2,508
-
2
-
-
Gutter 10' L
463
3,128
-
-
2
-
Gutter 12' L
464
3,748
-
-
-
2
Bolt, square head - 10mm M6
576
10
12
16
20
24
Bolt, square head - 15mm M6
588
15
4
6
8
10
Nut - M6
579
-
16
22
28
34
Nut caps
580
-
16
22
28
34
INTERNAL VIEW
