22
1.
Start by building the right hand door first.
2.
Attach the door middle to the two door stiles
(Diagram T). The door middle should be fixed with
the (‘U’ shaped) groove for the glass facing down. It
is also important to attach the door stile with the lock
on the correct side. This should be on the left hand
side looking at the door face on from the outside with
the holes for the door handle above the door middle.
3.
When the door stiles are in place slide the edging
strips into the channels on the inside edge of the ‘L’
shape. (Diagram R)
4.
Now slide one of the 563 X 880 glass panes into
the edging strips in the top section of the door. Slot
the door top (this has the door wheels attached) onto
the glass and fix to the door stiles using the self tap-
ping screws as before. (Diagram S)
5.
Repeat this on the bottom section of the door using
the door bottom to secure the glass. Fix the door
bottom in the same way as the door top (Diagram U).
6.
When you have finished the construction of the door you can bolt the door handle onto the left
hand door stile. The bolts should be inserted from the outside, with the nuts on the inside.
7.
You can now build the left hand
door.
8.
This is constructed in exactly the
same manner as the right hand
door. Except for the right hand door
stile that meets the other door. This
has a different profile to the others
stiles so that it locks in with the right
hand door.
9.
Now fix the door handle onto the
right hand door stile as in step 6.
10. Finally insert the draught excluder
fur in the small channel on the back
of the two outer door stiles (Diagram
R and S).
DOOR ASSEMBLY
373
373
379
377
583
563 X 880
558
558
Q
R
‘U’ shaped groove
563 X 880
563 X 880
TOP VIEW
Fur channel
Part Name
Part
Length
Qty
No.
mm
Required
Door middle - 618mm
373
618
2
Door stile - female, with lock
377
1,880
1
Door stile - female, without lock
379
1,880
2
Door stile - male
381
1,880
1
Door handle
384
112
2
Edging Strip - 870mm
558
870
8
Draught Excluder Fur
571
3,800
1
Screws, self tapping - 19mm M3.5
583
19
28
Bolt, square head - 10mm M6
576
10
4
Bolt, hexagon head - 25mm M4
575
25
1
Nut - M4 ny-lock
578
-
1
Door bottom - 618mm
707
618
2
Door Top - 618mm
708
618
2
