35
FINAL FIXING
DOOR INSTALLATION
416
379
508
403
OO
PP
379
430
526
375
707
1.
Take one of the doors and locate the first set of door wheels on the rails in the door
track (Diagram OO). When doing this you also need to locate the door guide on the
bottom of the door in the door runner (Diagram PP). When both of these are located
slide the door further along the track until you can locate the second set of door
wheels. To locate the door wheels and the door guide you will probably have to ad-
just the height of the door track, you do this by loosening the bolts that join the door
track support bracket to the front glazing bars.
2.
With the door half open you can now add the door stop (Diagram QQ & SS). Before
you attach the door stops you should push on the door stop bungs (560).
3.
Repeat step 1 and 2 for the second door. If you find that the door doesn’t run very
well at first, it is possible to fine tune this by adjusting the bolts on the main door track
support. (You can also use WD40 on the door wheels and rails for an even smoother
running door).
General maintenance:
For a smooth running door you should oil the wheels
regularly and keep the bottom door runner clear of grit by swilling with water.
