C R O S S C O U N T R Y F I V E - W A L L S E R I E S S T R A I G H T L E A N T O • G R E E N H O U S E I N S T R U C T I O N S
1.
Take all the Poly Bars and bolt themto
the gutter
(See Picture
D
).
start your bars
approximately 25” in from the end of the
gtter and base
(See Picture
E
) (Corner
post will be fastened to the ends when the
greenhouse is assembled.
2.
Bolt the Poly Bars to the base. Ensure all
Poly Bars fit tight at gutter and base.
A
B
Sidewall Assembly
C
D
E
Lay out the sidewall with the gutter at the top
- base atthe bottom
(See Picture
A
).
You will
notice that each sidewall Poly Bar has a straight
and an angle cut. The straight end fits againt
the base
(See Picture
B
)
and the angle goes
towardsthe gutter
(See Picture
C
).
Always face
the bolt slot in the Poly Bar towards you.
Base
Gutter
Gutter
Base
– 15 –
