– 29 –
C R O S S C O U N T R Y F I V E - W A L L S E R I E S S T R A I G H T L E A N T O • G R E E N H O U S E I N S T R U C T I O N S
END WALLS
Start off the same way as the sidewalls and roof panels – peel back the
protective coating, mark the corner with a marker so you know which
side is out. Apply foil tape, ventilated for the bottom / solid for the top
(you can do all the panels before hand or 1 at a time)
.
Start with a corner first and work towards the centre. Put aluminum
“ ” on the bottom of panels
(drop in 2 setting blocks)
. There is no
aluminum “ ” on the top of the sheets with the exception of the 2
panels
beside
the door.
After the
polycarbonate
panels have been
installed, take the
round foam and fill
the space between
the panels and the
aluminum
