High Capacity Ratchet Knockout Drivers
Greenlee Textron / Subsidiary of Textron Inc.
3
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815/397-7070
IMPORTANT SAFETY INFORMATION
Do not attempt to punch a hole
through two or more layers of
material. This will bend or break the
draw stud, and could throw parts
with great force.
Failure to observe this warning can
result in severe injury or death.
Inspect the tool, punch, die, and draw stud before
each use for wear or damage. Replace the punch if
the cutting surfaces are not sharp. A damaged or
improperly assembled tool can break and strike
nearby personnel.
Wear eye protection.
Failure to wear eye protection can
result in serious eye injury from
flying debris.
Read and understand all of the
instructions and safety information
in this manual before operating or
servicing this tool.
Failure to observe this warning can
result in severe injury or death.
A component failure could throw
broken parts.
• Do not allow anyone to stand in
front of the punch unit.
• Close access doors or covers on
any equipment that is in line with
the punch unit.
Failure to observe this warning can
result in severe injury or death.
This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury or
property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for
preventing or avoiding the hazard.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Hazards which, if not avoided, COULD result in
severe injury or death.
Immediate hazards which, if not avoided, WILL
result in severe injury or death.
SAFETY
ALERT
SYMBOL
Electric shock hazard:
Do not use this tool near live circuits.
This includes, but is not limited to,
the following:
• Near circuit breaker panels or fuse
boxes with energized circuits
• Near junction boxes with
energized circuits
Failure to observe this warning can
result in severe injury or death.