Greenlee Textron Inc. / Subsidiary of Textron Inc.
2
4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
755 Hydraulic Hand Pump
Description
The 755 Hydraulic Hand Pump develops 10,000 psi (68,950 kPa) and is in-
tended to be used with the following Greenlee conduit benders, tubing bender,
and punch driver.
Conduit Benders:
model 777
Punch Driver:
model 1732
model 880
Tubing Bender:
model 782
model 882
model 882CB
Fill with Greenlee hydraulic oil or Mobil DTE-13 only.
Purpose of this Manual
This instruction manual is intended to familiarize operators and maintenance
personnel with the 755 Hydraulic Hand Pump. This manual should be kept
available to the operating and maintenance personnel.
Safety is a critical factor in the design of Greenlee equipment. The best program starts with a safety-conscious
operator. The information highlighted in this bulletin describes operating practices for the benefit of the workers
who will use our equipment in their daily jobs. Comments from users are appreciated.
The symbol above is used to call your attention
to instructions concerning your personal safety.
Watch for this symbol. It points out important safety
precautions. It means “ATTENTION! Become alert!
Your personal safety is involved!” Read the
message that follows and be alert to the possibility
of personal injury or death.
Hazards or unsafe practices which COULD, if not avoided,
result in minor personal injury or property damage.
Hazards or unsafe practices which COULD, if not avoided,
result in severe personal injury or death.
Immediate hazards which WILL, if not avoided, result in
severe personal injury or death.
SAFETY
ALERT
SYMBOL
A person who has not read and does not understand all
operating instructions is not qualified to operate this tool.
Failure to read and understand safety instructions may
result in injury or death.
