881MBTS
52094216 REV 0
4
© 2021 Greenlee Tools, Inc.
Tool Specific Safety Information
Use the correct tool and accessories for your
application. The correct tool will do the job better and
safer at the rate for which it was designed. Use of the
tool for operations different from those intended can
result in a hazardous situation.
Before operating this tool, read and understand:
• This operator’s manual
• The instructions for any other equipment or
material used with this tool
• Markings on the tool
• Required work site safety procedures
Failure to follow all instructions and warnings may
result in serious injury.
• Keep hands away from moving parts.
Fingers
and limbs can be crushed.
• Do not stand in a direct line with the follow
bar while bending.
The follow bar is under high
pressure during use and has potential to propel
forward rapidly.
• Do not use as a step or ladder.
This table is on
wheels and could shift leading to a hazardous
situation.
• Secure loose equipment and materials before
operating or transporting table.
Loose equipment
or material can fall and cause tipping and striking
injuries or damage the equipment.
• Transport table over level surfaces to reduce
the risk of tipping.
Falling equipment can cause
serious injury
• Proper set up is essential to minimizing risk
during use.
Set up the tool and work area
according to these procedures to reduce the risk of
injury.
• Use personal protective equipment (PPE).
Always wear eye protection.
Protective equipment
used for appropriate conditions will reduce the risk
of personal injuries.
• Dress properly.
Do not wear loose clothing or
jewelry. Keep your hair, clothing, and gloves away
from moving parts. Loose clothes, jewelry or long
hair can be caught in moving parts.
• Keep bystanders a safe distance from the work
area.
Additional people close to the operator
increases the risk of injury to themselves and
the operator from distraction or interaction with
equipment.
• Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
• Use this equipment only in accordance with
these instructions, considering the working
conditions and the work to be performed.
Use
of this table for operations different from those
intended could result in a hazardous situation.
• Some parts and accessories of this tool are
heavy.
Use proper lifting techniques to reduce the
risk of injury.
• Do not alter this product in any manner or
attach any tools that are not specified in this
manual.
Use of this table with accessories and
equipment different from those specified could
result in a hazardous situation.
• Stay alert and use common sense when using
and transporting this equipment.
Keep control
of the table and be aware of the environment,
a moment of inattention may result in the table
tipping or rolling uncontrollably. Serious personal
injury can occur if the table hits someone.
Greenlee Contact Information
If you have any questions, need to arrange service or
purchase parts or accessories for this Greenlee product:
Contact your local Greenlee distributor or Greenlee’s
Customer Service Center.
Additional copies of this manual are available for
download at www.greenlee.com
Greenlee Customer Service
USA: 1-800-435-0786 | Canada: 800-435-0786
International: 1-815-397-7070
GRNCustomerService@emerson.com
Shipping address:
Greenlee Factory Service Center
4411 Boeing Dr., Rockford, IL 61109
www.calcert.com
sales@calcert.com
1.800.544.2843
0
5
10
15
20
25
30
