Greenlee / A Textron Company
7
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
960 PS Series Hydraulic Power Pumps
Motor Wiring Diagram
The 960 pump is equipped with a NEMA 5-15 plug for
connection to a standard outlet on a 115-volt, 15-amp,
60 Hz, single-phase circuit.
The PSL models are specifically wired and labeled
to meet the electrical code of Los Angeles County,
California. They are equipped with a NEMA 5-20 plug for
connection to a NEMA 5-20 receptacle on a 115-volt,
15-amp, 60 Hz, single-phase circuit.
For operation at 230 volts, Greenlee suggests returning
the pump to the factory.
To convert the pump to 230-volt operation:
• Re-wire the unit according to the wiring diagram that
corresponds to the motor on your pump. Then replace
the plug with a NEMA 6-15 plug.
• Solid state relay (Part No. 918 6403.8), motor, switch,
and all other components are suitable for 230-volt
operation.
Note: Greenlee will not be held liable for injuries or
damage resulting from re-wiring the pump.
• Occasionally check oil temperature after pump is
operated. The recommended operating temperature
is 38
°
C to 50
°
C (100
°
F to 125
°
F).
CONNECTIONS FOR CW ROTATION (VIEW FROM LEAD END OF MOTOR)
LOW VOLTAGE
Purple P1
Brown P2
Black T5
Orange T3
Red J10
White T2
Yellow T4
Purple P1
Brown P2
Black T5
White T2
Orange T3
Red J10
Yellow T4
Insulate This Lead
High
Voltage
Line
HIGH VOLTAGE
Low
Voltage
Line
Brown (10)
Violet (9)
Pink (1)
Orange (5)
Red (8)
Blue (4)
Black (2)
Brown (10)
Violet (9)
Pink (1)
Blue (4)
Orange (5)
Red (8)
Black (2)
Franklin GE
Franklin GE
(R3)
(R3)
(R2)
(R2)
R3
R4
R2
R1
MOTOR
LINE
L2
WHT
L1
BLK
GRD
GRN
MTR GRD
GRN
PENDANT
SWITCH
2x #8-32
2x #6-32
PURPLE
YELLOW
WHITE
RED
ORANGE
BROWN
BLACK
G.E.
BROWN
BLACK
BLUE
RED
ORANGE
VIOLET
PINK
F.E.
